How to Make a Lamp

Make an attractive and usable electric lamp with readily available materials and a lamp wiring kit. A bottle, vase, box or even stacked boxes or books can act as a base through which you can run the wire. The lamp kit provides wiring and fixtures, and lampshades are available in a variety of styles at department stores and discount stores. Lamp kits are sold at home improvement and craft stores, and include different fixtures, according to the type of base and lampshade you choose for the lamp. You can also purchase parts separately. These instructions are for a lamp made with a bottle or vase as a base. Does this Spark an idea?

Instructions

How to Make a Lamp

1




Secure the vase or bottle so that it does not slip, and drill a hole through the bottom to run the cord.

2




Enter the wire ends of the cord through the drilled hole, pull up, and thread through the fixture pipe (if used), harp bottom (if used), and the socket base.

3

Connect the neutral wire to the white or silver screw on the socket, and the hot wire to the other screw (usually a darker color), ensuring that all of the wires are held securely under the screw heads. (With some lamp kits the socket is already attached.)

4

Add sand or other objects for weighting the base, keeping in mind that the amount will vary depending on the container's size.

5

Mount the harp bottom (if used) and lamp socket base to the fixture pipe, which extends from the base; if needed, secure it to the base with hot glue.

6




If using a lamp harp, raise the sleeves on the harp arms, squeeze the arms together so that they slide into the harp bottom, and lower the sleeves to secure the harp.

7

Add a lampshade: Depending on the lampshade used, either place it directly on the light bulb, or on the threaded stud and then secure it with the finial to finish.